The vermiculite fittings, insulators and moulders used in Type 5 fireplaces and boilers are produced exclusively from Vermeko ThermoVerm vermiculite boards, which are characterized by higher mechanical strength, minimal thermal shrinkage and very low thermal conductivity.
In the heating products the moulders are responsible for raising the temperature of the combustion and preventing uncontrolled heat loss. They allow to kept the glass clean, reduce fuel consumption, isolate the door and prevent burns in case of heating up of the stove. The temperature on the outside of the devices is reduced to below 30 ° C.
THERMAL CONDUCTIVITY:
λ - 0,10 - 0,16
TENSILE STRENGTH: COMPRESSION:
(PN-EN ISO 8895:2007)
42 - 50 kg/cm 2
TENSILE STRENGTH: BENDING
(PN-EN 993-7:2001)
16 - 30 kg/cm 2
DENSITY:
600 - 800 kg/ m 3
LINEAR SHRINKAGE:
(PN-EN 1094-6:2001P)
max. 2 %
COMBUSTIBILITY:
(PN-EN 13501 -1+A1:2009(A1))
Non combustibility material
APPLICATION TEMPERATURE:
-260 - 1200 oC
